High Strength Pre-applied Thread locker Adhesive& Sealant

1.Pre-applied Thread locker 2.Applicable to phosphated and electroplated surfaces. 3.Designed for screws (bolts) M8-M16

  Darbond® Pre-applied Threadlocker2204

  Typical Properties

High strength, two component.Be equivalent to Darbond Threadlocker 2262 and 2271.Applicable to phosphated and electroplated surfaces. Designed for pre-applying screws (bolts) M8-M16.Can be applied manually and automatically.Prevent the threaded fasteners from loosening, leaking and rust.

                 

Detailed Products of Darbond® Anaerobic Threadlockers  

Product No.	Typical Use	Max Gap Fill mm	Uncured			Cured			Curing Speed
			Color	ViscosityGB/T2794-1995mPa.s	Specific GravityGB/T13354- 1992g/cm3	Break TorqueGB/T18747.1- 2002N.m	Prevail Torque GB/T18747.1-2002N.m	Temp. Range °C	Fixturemin	Full cureh
2222	M2-M8, removable	0.13	Purple	1200Thixotropic	1.05	6	4	-50-150	10-30	24
2242	M8-M16, removable	0.13	Blue	1700Thixotropic	1.05	12	5	-50-150	10-20	24
2243	M8-M20, light oil contamination	0.13	Blue	2750Thixotropic	1.05	20	7	-50-150	10-30	24
2262	M10-26, removable	0.13	Red	2300Thixotropic	1.1	22	30	-50-150	10-30	24
2270	M25 and larger,permanent	0.13	Green	500	1.1	26	36	-50-150	10-20	24
2271	M16-M26, permanent locking and sealing	0.13	Red	425	1.12	27	30	-50-150	10-20	24
2272	High temperatures resistant to 230°C, under M32	0.25	Red	9500	1.12	22	24	-50-230	20-30	24
2277	M24-M36, permanent locking and sealing	0.25	Red	7000	1.12	30	30	-50-150	20-30	24
2290	Under M12, wicking grade	0.1	Green	12	1.08	10	26	-50-150	5-20	24
2204	Pre-applied, equivalent to 2262, 2271	0.25	Red	13000Thixotropic	1.05	18	30	-50-150	5-12	72

High Strength Pre-applied Thread locker Adhesive& Sealant