1.Oil Tolerant Thread Sealant 2.Used for surface with slight oil contamination 3.Contains no fillers 4.Ideal for under M36 Introduction  Darbond® 2545 is one component, thixotropic viscosity, low strength anaerobic pipe thread sealant. It cures when confined in the...

Water-based pre-applied thread sealant Dispense manually Suitable for copper thread. Seal tapered/tapered, straight thread Introduction  Darbond® 2516 is one component, high viscosity, nontoxic, thixotropic, water-based pre-applied thread sealant. Suitable for manual...

1.Thread Sealant/Compound 2.Seal R11, R12, 502 and its substitute 3.Contains no fillers 4.Ideal for under M80   Typical Properties of Darbond® 2554 Good chemical resistance, especially R11, R12, 502 and its substitute.Contains no fillers, and will not foul...

1.Pre-applied Thread locker 2.Applicable to phosphated and electroplated surfaces. 3.Designed for screws (bolts) M8-M16   Darbond® Pre-applied Threadlocker2204   Typical PropertiesHigh strength, two component.Be equivalent to Darbond Threadlocker 2262 and...

1.Wicking Grade Anaerobic Threadlocker 2.Excellent chemical resistance. 3.Penetrate threads by capillary action, under M12. Introduction  Darbond® Anaerobic Threadlocker 2290 is one component, low viscosity, medium strength, high penetrability anaerobic threadlocker. It...

Anaerobic thread locking adhesive Medium strength Controlled lubricity for accurate clamp loads,removable General purpose Introduction Darbond® Anaerobic thread locking adhesive 2242 is one component, medium strength, thixotropic viscosity, general purpose...

High strength thread locking adhesive&Sealant Excellent chemical resistance Designed for permanent locking and sealingM16-M26 Darbond® High strength thread locking adhesive&Sealant 2271Typical Properties  High strength, medium to low viscosity.Excellent...

Wicking Grade Thread locker Adhesive&Sealant Excellent chemical resistance. Penetrate threads by capillary action, under M12.   Darbond® Wicking Grade Threadlocker Adhesive&Sealant 2290  Typical Properties One component, low viscosity.Medium strength,...

1.Pre-applied Threadlocker 2.Applicable to phosphated and electroplated surfaces 3.Used for pre-applying screws (bolts) M8-M16 Introduction  Darbond® Pre-applied Threadlocker 2204 is two component, high strength pre-applied threadlocker. Mix A and B component evenly...

Anaerobic Threadlocker High strength Excellent chemical resistance Good lubricity Permanent locking and sealing M16-M26 Introduction  Darbond® Anaerobic Threadlocker 2271 is one component, medium to low viscosity, high strength, anaerobic threadlocker. It cures when...