1.Gasket remover 2.Colorless, clear liquid 3.Designed for removing various gaskets, paint, oil stain, carbon deposit etc IntroductionDarbond® Gasket Remover 2790 can remove cured gasket residuum, oil, paint, and carbon deposit etc. surface residuum. No corrosion to...

1.Hi-Temp Anti-Seize 2.General purpose. 3.Used for lubricating chains, threaded fasteners etc. IntroductionDarbond® 2767 is one component, general purpose, high temperature anti-seize lubricant. It is graphite based, mainly used as a lubricant at high temperature. Maximum...

1.Metal Cleaner 2.General purpose, industry-grade. 3.Strong oil clean ability, slight odor and stable chemical property. IntroductionDarbond 2755 is a general purpose, industry-grade surface cleaner. It has strong oil clean ability, slight odor, high boiling point and stable...

1.Oil Tolerant Thread Sealant 2.Used for surface with slight oil contamination 3.Contains no fillers 4.Ideal for under M36 Introduction  Darbond® 2545 is one component, thixotropic viscosity, low strength anaerobic pipe thread sealant. It cures when confined in the...

Water-based pre-applied thread sealant Dispense manually Suitable for copper thread. Seal tapered/tapered, straight thread Introduction  Darbond® 2516 is one component, high viscosity, nontoxic, thixotropic, water-based pre-applied thread sealant. Suitable for manual...

1.Solvent based activator for cyanoacrylate adhesives. 2.To improve curing speed of Darbond brand cyanoacrylate adhesives. IntroductionDarbond 2712 is a kind of solvent based activator for cyanoacrylate adhesives. It is mainly used for improving curing speed of Darbond brand...

1.Thread Sealant/Compound 2.Seal R11, R12, 502 and its substitute 3.Contains no fillers 4.Ideal for under M80   Typical Properties of Darbond® 2554 Good chemical resistance, especially R11, R12, 502 and its substitute.Contains no fillers, and will not foul...

1.Pre-applied Thread locker 2.Applicable to phosphated and electroplated surfaces. 3.Designed for screws (bolts) M8-M16   Darbond® Pre-applied Threadlocker2204   Typical PropertiesHigh strength, two component.Be equivalent to Darbond Threadlocker 2262 and...

1.Wicking Grade Anaerobic Threadlocker 2.Excellent chemical resistance. 3.Penetrate threads by capillary action, under M12. Introduction  Darbond® Anaerobic Threadlocker 2290 is one component, low viscosity, medium strength, high penetrability anaerobic threadlocker. It...

Anaerobic thread locking adhesive Medium strength Controlled lubricity for accurate clamp loads,removable General purpose Introduction Darbond® Anaerobic thread locking adhesive 2242 is one component, medium strength, thixotropic viscosity, general purpose...